Drink Up Kit

The Drink Up kit and the keg with its stopper allow you to use the new connected Drink Up portable tap. These products are washable, reusable and compatible with the Beer Up tap. The kit uses 16 gram CO² cartridges. Easily attaches to the top of the barrel with a quarter turn and the gas is automatically released. The maintenance kit includes 3 free CO² cartridges. You can order other cartridges on this page.

This article includes 2 products:

- a bottle and a Drink Up cap free

- a washable and reusable Drink Up service kit, which contains in its box: a pressure limiter to hold the CO² cartridge, an immersion tube, a fork and a filling nozzle, 3 CO² cartridges.

- FREE SHIPPING FROM €38

- DELIVERY IN 4 TO 5 DAYS

- SECURE PAYMENT

- ORDER TRACKING

Instructions for use :

• If you use the Drink Up keg, fill it yourself with the drinks of your choice, between 2 and 5 liters (you don't have to fill the keg completely).

• Next, close the keg with the Drink Up cap and store it in a cool place for as long as you want. 5 hours for a barrel full of already fresh drinks and up to 10 hours if the drinks are not fresh.

• Then you just have to use the service kit supplied with the machine to enjoy your drink in the special glasses. To do this, screw on a gas cartridge, then pierce the center of the cap and lock the device by turning it a quarter of a turn clockwise.

• Attention: After use, the remaining gas pressure in the barrel and cartridge must be released by pulling the decompression ring upwards.

• You can reuse the barrel and cap for up to ten refills. The barrel and cap are washable and reusable. We recommend using these products for a dozen fills as the stopper may show signs of leaking and your barrel may be contaminated. We recommend that you carefully read the maintenance instructions for the kit and the drums for proper hygiene of use. You can reuse the barrel and cap for a dozen fills.

• Note: A new CO² cartridge is needed for each new keg refill.

Rinsing the Drink Up kit:

either Run hot water through the kit's dip tube, which has been turned up. In this way, hot water flows through the inside of the tube to clean it and comes out through the gray glass filling nozzle.

either Important: to make the water come out of the gray nozzle, press the trigger.